Buffalo HueForge
Buffalo HueForge
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.8mm and the Actual Depth is 2.4mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #15 (1.28mm) swap to Black
At layer #17 (1.44mm) swap to Blue
At layer #21 (1.76mm) swap to Yellow
At layer #22 (1.84mm) swap to Jade White for the rest.
Design by Rich C on MakerWorld (license: CC0).