Cable Support for Wooden Joists | Cat6 | Coax

This part is meant for attic or ceiling spaces where you wish to support cables such as cat6 or coax along some wooden joists. Please do not put romex or other high voltage in this, just communications cables. I suggest using ABS or ASA because you'll want to have some screws holding this up, and attic spaces can get quite hot in some cases, so there's a slight risk PLA could deform with the weight of cables pulling on it. I intended for this to hold up about 24 cables but your situation could vary depending on diameter.

Design by TCI Productions on MakerWorld (license: CC0).