Cam Lock Print in Place for Straps (V2)
Cam Lock Print in Place for Straps (V2)
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Cam lock V2 for straps and ropes. Held in place by pressure from the cam. For ~1mm thick straps or ropes.
The cam is bi-stable, it will not open when there is no pressure.
Does not need supports. Printer does not need to be capable of a very long bridge, but it will help it get a smooth rotation.
Originally designed for SlimeVR tracker straps, this is an alternative to velcro or conventional buckle.
Won't hold a huge amount of weight, but is strong enough to comfortably attach something light to a limb.
These work when printed on a Bambu Labs P1S, but I can't say it will on lower end printers.
Prints with relatively low tolerance for a print in place mechanism, you will likely need to place it upside-down on a flat surface and press down with your palm to break it free. Wait for it to cool down before you do that, or it could break.
Design by fui on MakerWorld (license: BY-SA).