Customizable Exhaust Vent Wall Plate w/ Hex Mesh

Wall plate for exhaust ducting. Can be used to attach a duct to an outside wall. I use it to route my P1S's exhaust duct to the outside. The hex mesh prevents insects from coming in. Screw holes are included to mount it with screws or zip ties.

The included print profile is for a 100mm (4") duct and has a 120mm plate but you can parameterize it for whatever size you need.

The hex hole size has to be at least 4mm in order to print with a 0.4mm nozzle and 0.16mm layer height. Set the `mounting_hole_diameter` to 0 if you don't need mounting holes.

Design by Cactus 973 on MakerWorld (license: BY-SA).