CyberLock

Say goodbye to fumbling about with old fashioned keys. Tench Toot LA's CyberLock transforms the CyberBrick official remote into a high tech lock opener, unlocking doors at the flip of a switch. Just assemble it, and you're ready to go!

Assembly:

1. cut one servo horn to it's smallest size
2. fit the servo horn onto a 360˚ continuous servo
3. fit the motor gear (printed) onto the servo, and screw in place
4. slot the servo into the rectangular slot in the case (printed), making sure the cable protrudes through the slit
5. insert 3 4x2mm magnets into the holes on the bottom of the latch gear (printed)
6. slot the latch gear into the hole in the case, oriented with the lock symbol facing up
7. plug the servo cable int port 1 on your receiver
8. connect the battery to your receiver, and put the wiring in the large opening in the case
9. fasten the cover to the case with 4 M2.5 screws
10. mount the lock on your door with screws or two way tape, making sure the latch gear fits snugly on the latch

Disclaimer: Tech Toot LA is not liable for any security issues arising from the malfunction of this product. This product is intended as a secondary tool for your convenience , not as a primary security measure.

Note: Tech Toot LA does not guarantee that this product is compatible with your lock. We recommend measuring your lock before printing and modifying the file if needed

Design by Tech_Toot_LA on MakerWorld (license: CC0).