Deadlift Wedge- Purge Model

So I had originally used this as a print just for a tool. I now use it as a flush model to save on bambu poop! by placing one of these and printing in horizontal it is the height of most models I print and at 100% infill takes most of the flush into a useful item I can give to my friends at the gym!

Original: Simple Deadlift wedge with slots for 10mmx2mm magnets for storage on the rig. Print 2 and roll the first plate on each side on, easy loading/unloading. I tested mine printed 0.2 layer height with 50% infill up to 405 lbs with no problems. Can be brittle if attempt to use to pry or dropped but cheap and easy to make again. I used superglue to hold in the magnets.

Design by tmreedinc on MakerWorld (license: BY).