DnD themed D20 Clean/Dirty Dishwasher Magnet

DnD-themed Flip-disc dishwasher magnet clean/dirty indicator! Flip the magnet to ‘clean’ when you start the dishwasher, preventing someone else in the house from accidentally putting a dirty dish in with clean ones. After emptying, flip to ‘dirty’!

For best results, I recommend you print in two pieces with the text face-down on both (plates 3 and 4 in the 3mf).

I used the following filaments:

-Bambu PLA Matte Charchoal

-Bambu PLA Basic Gold

Required materials:

-4x Neodymium magnets 5mm x 2mm 

-Super glue (Optional)

Assembly:

Simply insert the four magnets into the divots on one side of the disc, then super glue the two sides together.

UPDATE: Now printable as a single piece, no glue required! Simply insert the magnets into the holes during the pause at layer 13, then resume the print. 

There are now three print options:

1. (Recommended) Two pieces glued together with text facing the build plate (plate texture will be visible)
2. Two pieces glued together with text facing up (plate texture will not be visible)
3. Entire magnet printed as one piece, no glue required, magnets inserted during a pause. Plate texture will be visible on one side and not the other.

Design by Jeff_SmartPhys on MakerWorld (license: BY-SA).