Euro Coin with NFC-Insert
Euro Coin with NFC-Insert
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Summary
Remix from the design, but i added a 0.5m insert for the NFC/RFID tag:
Diameter: 26mm, height 0.5mm
Simply add the command to your slicer to stop at a certain height.
In this case the hole is generated from 2.5 to 3/3.1mm.
Instructions for cura:
https://all3dp.com/2/cura-pause-at-height-how-to-do-it/
So i recommend to stop at 3mm and insert the NFC-Tag.
Please test/write the tag before inserting. Otherwise you might insert a read-only or broken NFC-Tag.
I will use it for a paypal.me link :P
Print Settings
Printer:
Geeetech A10T
Rafts:
No
Supports:
No
Resolution:
200
Infill:
35
Filament: Generic PLA PLA Yellow/Gold
Notes:
Print w/o support, pause print at 2.5-3.0 mm height in order to insert the NFC-Tag.
Design by 3DJupp on MakerWorld (license: BY).