Exterior Light Shade

Print “Shade_Lamp” in Translucent PTEG. Print with “Vase Mode”

I used an 0.8mm nozzle

0.4mm Layer Height

1.0mm Line Width

2.3 mm base

Print “Top_Lamp” in PETG. Glue to inside top of shade.

Print “Holder_Lamp” in TPU will probably work with PETG hold in place with a cable tie. see pictures.

The design of this model was from a Vase designed by Devin Montes.

https://www.myminifactory.com/object/3d-print-bulb-vases-41894

Design by jdalycache on MakerWorld (license: CC0).