Full Delta Stand for Blue Angels

A six-plane Delta Stand for all of pbbence1994's F/A-18 Super Hornets in Blue Angels livery.

Many thanks to pbbence1994 for permission to publish the stand for his followers.

This pushes the limits of size to fit on a P1S. I am not fully happy with the position of all of the planes but to stay within the limits of the build plate and not make it more complicated that it need be, I had to settle with some choices. #5 sits very low and #4 uses the same stand as #1 so it is sitting directly in line rather than lower. But overall, I think the viewing effect is acceptable.

Be sure to use a strong infill on those stands. I went light on the prototype and they are wobbly but will settle down. Keep an eye on #3 and #6 to watch for droop over time.

EDIT 11/12/2025:

I have changed some of the arms to be stronger with thicker arcs. I still suggest you print them with extra walls and a higher Gyroid infill for best strength.

EDIT 12/16/2025:

Per some requests, I have opened up the slots in the base to allow for easier insertion of the arms. Also modified the arm for #4 to put it inline with #5 & #6.

Design by Tim on MakerWorld (license: BY-SA).