Fuzzy Skin Test Hexagon

There are a lot of models for test prints of different fuzzy skin options generated by the slicer, but they are often too big, so they need a lot of time and filament to print.

I find the best settings are when the skin point distance has the same value as the thickness of the fuzzy skin.

So I made a small model with 6 different patterns of fuzzy skin options: 0.1-0.6mm with distance = thickness.

It only needs about 15g of filament and is printed in about 50 minutes on a modern printer.

Scalable down to 75% which reduces time and filament to about 50%, but I prefer the original size.

Design by schiko on MakerWorld (license: BY).