Geometric Style Vertical Laptop & Tablet Stand

I wanted a vertical laptop stand for my desk that was sufficiently strong enough for my gaming laptop, and also allocated a space to store my iPad Pro. Most of the existing designs I found either weren't stable enough for a heavier laptop, or were a bit of an eyesore. 

With that in mind I created this geometric styled stand, with a 25mm slot at the back (which fits my MSI GS40 with just a little bit of extra space), and an 18mm  slot at the front (which is perfect for my iPad Pro its Logitech Combo Touch case). The footprint of the stand is 150mm wide x 155mm deep, and it's 80mm high.

The stand is rock solid with both devices loaded (or either one alone), and is heavy enough to not move about while loading or unloading your laptop or tablet. To protect your devices and desk I would recommend super gluing a little felt into the base of the slots, and either add stick-on rubber feet or more felt to the underside of the base.

The model in the photos was printed on a Bambu A1 Mini, with Bambu Charcoal PLA (Matte). I used tree supports and they came off cleanly and easily. 

This was my first design upload so feel to offer any advice on either the model or this write up. There's always room for improvement!

Design by Mick Dundee on MakerWorld (license: BY).