Gladiator Helmet

Support is needed for overhanging parts
Tree support at 15% with a 45-degree angle
Z offset at 0.3 mm for easy removal support
Layer height at 0.16 mm for stability, strength and fine details
Gyroid pattern as infill at 15%
Print speed of the outer wall at 150 mm/s and inner wall at 200 mm/s
Seam position set to ‘nearest’ for a smoother surface
Print time is 90 minutes with the original file size and print settings
Might need some sanding for better colour merging

Design by GG on MakerWorld (license: BY).