GoPro Mount Phone Holder
GoPro Mount Phone Holder
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
This phone holder allows you to mount your smartphone to a wide range of GoPro-compatible accessories. The printed spring design accommodates phones of various sizes without requiring any adjustments. The holder has been tested with devices ranging from 69.5 to 82 mm in width.
Printing Notes:
- The flexibility of the spring is essential to the design, so this model must be printed in PETG.
-
When slicing the model, pay close attention to the seam position. Placing the seam at the base of the spring may create a weak point and could lead to failure or breakage during use.Please refer to the image below for the recommended seam placement.
Notes:
- PETG is the recommended material for this design. ABS can also be used, but the spring failed when tested with a dummy phone width of 82 mm. it performed without issues with a 78 mm wide phone fitted with a case. PLA is not suitable for this design, as the spring failed during testing with a phone width of 72 mm.
- This design was inspired by Flexible & Sturdy Phone Arm.
- For users who need a stronger hold, an optional M3 square nut and M3 screw can be used to secure the phone more firmly.
-
A clamp with the same design language as this clamp is also available here:
https://makerworld.com/en/models/2967984-gopro-mount-clamp#profileId-3328167
Design by BaGooN on MakerWorld (license: BY-SA).