Headphone Holder V2.0

Description: Keep your workspace clean and clutter-free with this sleek, low-profile under-desk headphone holder. Designed with a convenient two-part sliding mechanism, this mount allows you to securely hide your headphones out of the way while keeping them easily accessible.

The curved resting bed is designed to distribute the weight of your headphones evenly, preventing dents or creases in your headband cushion.

Key Features:

• Two-Part Assembly: Features a separate mounting base and a sliding hook. The base stays permanently mounted, hiding the screw heads for a clean, professional look.
• Secure Fit: The holder piece shoves firmly into the base via a friction-fit track, ensuring your headphones stay put.
• Low Profile: Maximizes your desk space by keeping bulky over-ear headphones completely out of the way.

Hardware Required:

• 2x M4 x 10mm normal metal screws (Ensure the length is appropriate for your desk thickness so it doesn't poke through the top!)

Assembly Instructions:

1. Position the small, figure-eight base plate on the underside of your desk where you want your headphones to hang.
2. Screw the base into the desk using the two M4 x 10mm metal screws.
3. Take the main headphone holder piece and slide its top prongs firmly into the base bracket until it is fully seated.

Recommended Print Settings:

• Material: PETG, PLA+, or ABS/ASA (PETG is recommended as it offers great durability without snapping under weight).
• Layer Height: 0.20mm
• Wall Loops (Perimeters): 4 walls (Crucial for the structural strength of the hanging hook).
• Infill: 20% - 30% (Gyroid or Cubic for optimal strength).
• Orientation & Supports: Print the main holder on its side if possible for the best layer adhesion along the stress lines, or use standard supports if printing upright.

Design by eretuka on MakerWorld (license: BY-SA).