Heart Picture Frame (with magnets)

A picture frame in a heart shape and some floral accents. The visible area of the pictures is 52x38mm. The area behind the frame is 65x50mm. Every picture can be held in place by the backplate wich holds with magnets. In the picture I used some random dog pictures as my family wouldn't like to be published, just imagine some pictures of the kids in it as a gift for the grandparents or something similar.

The frame has two cutouts for hanging onto screws, or you use just a little bit of double sided adhesive tape as I did.

I designed for 3 different magnet sizes: 3x1mm, 4x1 mm & 5x1mm.

The clearance for the magnets is 0.15mm. If you need a different clearence you can use X-Y hole compensation.

If you have different sized magnets scaling all parts may work for you. Lets say you have 3x2mm Magnets you can scale the 3x1mm frame to 200% in the Z-axis. Or if you have access to a bigger printer you could scale all axes at 200% and 6x2mm Magnets would fit. In that case you would be able to insert bigger pictures as well.

There are two different backplates. Backplate 1 needs to be printed 3 times. Backplate 2 only once. It is for the center picture and needed a cutout.

I originaly designed the backplates so that the magnets touch the ones from the frame. If you want the magnets to be on the back of the plates you need to mirror Backplate 2 to get the cutout on the correct edge. I already mirrored it in the supplied print profiles, but if you use the raw files, you need to mirror it yourself.

Design by Kai on MakerWorld (license: BY-SA).