Heater Duct for P1S X1C Chamber heater mod
Heater Duct for P1S X1C Chamber heater mod
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
This model is my addition to Ember Prototype's excellent heated chamber mod for the X1C here:
When doing the same mod to my P1S, I noticed some slight deflection in the P1S's outer plastic panels happening, so I created this duct to sit on top of the space heater to deflect the heated air away from the outer panel (and away from the wall of the electronics bay).
You may need to adjusting the mounting height of your heater to avoid the duct interfering with the screw boss for the AUX fan.
The model is pre-mouseeared for bed adhesion.
Print in an extremely heat resistant material like PA6-CF. The temperature I measured in the exhaust (below the grill of the heater) topped out around 140C. The duct I printed in PA6-CF and annealed has had no issue with being used to heat the chamber to 60C for extended periods.
Design by Pathian on MakerWorld (license: BY-SA).