Hueforge Cafe Racer
Hueforge Cafe Racer
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Project: Cafe-Racer.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 163.95x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #9 (0.8mm) swap to Grey
At layer #11 (0.96mm) swap to White for the rest.
Design by Th@rpedito on MakerWorld (license: CC0).