Hueforge Donald Trump - 5 colours printing

Project: Trump multicolor.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 122.5x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 4.1
    PLA Kingroon Blue Transmission Distance: 4.1
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 4
    PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions for the slicer:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #13 (1.12mm) swap to Red
    At layer #18 (1.52mm) swap to Yellow
    At layer #22 (1.84mm) swap to Black (again)for the rest. The black filament spool should have already been replaced with the white filament spool after the color change of layer 8. You can add a layer pause if you like (it's not yet included in my project). The model should look like this after slicing

To understand how this 5-color printing system works, you can watch various video tutorials on how to print in 5 colors here:

https://www.tiktok.com/@dddprinter/video/7380976344294837537

https://www.youtube.com/watch?v=lDQwRoinq9c

Let me know if you have any question.

Design by Luckyfer on MakerWorld (license: CC0).