IKEA Skadis wall mount and spacers

Here is another way to mount the IKEA Skadis plate on your wall with the 3M Command painting strips.

You will need at least two pegs to mount the top part and at least one spacer for the bottom (stabilise the panel to allow front pressure).

I use 50x19mm 3M Command painting strips because they are easy to reapply, and they leave no marks in the rented house if removed according to the instructions.

Here is the panel I used (the one from the image). Good if its easier for you to print versus to buy from IKEA: https://makerworld.com/en/models/64014#profileId-1146509 

Here is the Cutter Hook for it (the one from the image): https://makerworld.com/en/models/401527#profileId-303101 

Here is the Pin Hook for it (the one from the image): https://makerworld.com/en/models/632335?from=search#profileId-557331 

Design by romanaerl on MakerWorld (license: BY).