Jack Sawyer running for endzone
Jack Sawyer running for endzone
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
hours to print
This is Hueforge of JackSawter Running To Endzone
Takes 9 hours to print
Project: jack.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240.9x160.68mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Scarlet Red
At layer #19 (1.6mm) swap to Ivory White for the rest.
Design by brady.bowling on MakerWorld (license: CC0).