Jason Woorhees' mask hueforge

Jason Woorhees' mask hueforge. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x194.4mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA Jayo Black Transmission Distance: 0.2
    PLA+ Jayo Grey Transmission Distance: 2.3
    PLA Elegoo White Transmission Distance: 5
    PLA Jayo Red Transmission Distance: 5.9
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Grey
    At layer #9 (0.8mm) swap to White
    At layer #21 (1.76mm) swap to Red for the rest. 

Design by cow on MakerWorld (license: BY-SA).