Kitchen drain bowl rack / 厨房沥水碗架

比较轻便的沥水碗架，如果不想使用支撑打印，可以将两个增高的支撑柱去掉。填充请不要低于10，否则承重很差。蓄水盒可以选择5的填充。，希望我的东西对陌生人的你有用吧！由于我的英文比较差，所有的英文都是使用有道翻译。哈哈

If you don't want to use a support for printing, you can remove the two raised support columns. Please do not fill below 10, otherwise the load bearing is very poor. The water reservoir can be filled with 5 options. , I hope my stuff will be useful to you who are strangers! Due to my poor English, all English is translated using Youdao. Ha ha

Design by 木头 on MakerWorld (license: BY-SA).