Latch for Sunlu AMS Dryer

I needed a latch be able to use the AMS flipper with the Sunlu AMS dryer.

This is a remix of the Sunlu AMS heater latch by Blender76. I changed the base of their model so it can be screwed to the AMS, and I added a hinge for ease of operation.

Update: I recommend gluing a piece of EVA foam on the latch for a better fit. See the pictures, I glued a piece of 2mm EVA foam to the latch using some rubber cement glue.

You'll need:

_(2) M4x30mm screws with nuts (for the hinge)

_(2) AMS transport screws or BT3x16 -AA110 (to attach the latch to the base of the AMS)

_(2) 35x15x2mm pieces of EVA foam (and glue)

Design by GH Maker on MakerWorld (license: BY-SA).