Michael Jordan Hueforge
Michael Jordan Hueforge
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Beautiful Michael Jordan Hueforge.
I made it thin to have printing go fast. Perfect result on my P1S. I used SmashD`s perfect print profile for Hueforge. Recommended!
PS: Im not the artist of this image and I`am not claiming to be. This is just a share of a simple Hueforge made from an free stock image.
Printing instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x250mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 3 unique filaments
Swap Instructions:
Start with Jade White
At layer #11 (0.96mm) swap to Red
At layer #16 (1.36mm) swap to Black for the rest.
Design by Remikst on MakerWorld (license: CC0).