MN82 Rear Leaf Spring Suspension Mod

This mod is a cheap and easy way to get a little more travel out of your stock MN82 rear suspension. 

Assembly instructions:

1.  Remove the two screws towards the front side and bend the leaf spring flat. 
2.  Insert the block in between, push the leaf spring through the slit and out the other way.
3.  Screw the block in with the original hardware. 

     (Optional, but recommended for the best suspension) 

1.  Remove the springs from the rear shocks, keeping the shocks in place.
2.  Remove one of the plastic leaf springs by unscrewing the two screws that hold them in place and sliding them out. 

Design by Pat's RC on MakerWorld (license: CC0).