My take on IKEA Skadis Peg Board
My take on IKEA Skadis Peg Board
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Test Print available so that you can test the clip mechanism.
Keeping it simple with the method of attachment. This allows for all the holes to be available in all directions even if paired with other sizes. Which ever location is chosen the wall mount and clip will not interfere with your attachment.
Material Selection:
The wall mount and peg board can be printed out of any material of preference. From experience; I have had better luck printing the clip from ABS or PETG. Printing the Ikea skadis clip from PLA tends to fracture more often.
For installing one peg board I recommend the following:
- Clean general surface area of intend location
- Cut and adhere double sided tape to all wall mounts (DO NOT remove other side of protective film yet)
- Firmly clip pegboard and wall mount together with printed clip
- Remove protective film from double sided tape
- Firmly press to cleaned location on the wall
I used this double sided tape; measuring at .4 inches in width; not an affiliate link. https://www.amazon.com/dp/B093Q2BRSD?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
Design by Meave Consulting on MakerWorld (license: CC0).