openGrid - 6mm hex Multiconnect lock snap

Remix based on work from @Wayward_Electron & @david.d

• Hex slot increased to 6mm
  • Easier to turn / less chance of stripping if the first layer sticks together a little
• Hex slot goes through the full depth
  • Extra leverage makes it significantly easier to remove
• Triangle marker added to make it easier to visually identify when the snap is locked
  • Points at an angle when unlocked
  • Points up / towards the grid border when locked

Printed with 4 walls & 50% infill – could probably do with less, but the time / filament difference wasn't much.

Design by TImTucker on MakerWorld (license: BY).