Panda Touch Mount Remix (Uses Original Mount)
Panda Touch Mount Remix (Uses Original Mount)
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
*USES ORIGINAL MOUNT*
I took the small LCD mount from @elsebski and the panda touch mount from @Pretzel3D
What I essentially did was make the two mounts compatible. Although my design is not the best and can definitely be improved (please do), I have made these two compatible, so there is no need to remove the magnets from the original mount. Now, you can just use the original mount and have a less visible LCD mount to go with the panda touch mount (some panda touch mounts have the hinge on the outside of the mount where it is visible).
Six total screws will be required, two for the hinge, and four for attaching the original mount to the back mount that attaches to the LCD mount. I used M3 screws but anything around that thickness should work. If you look at the two projects side by side, you will understand why I made a remix of both of these projects. Assembly should be easy enough. Just make sure to take out the LCD screen out of the printer before installing the LCD mount, otherwise, you will not be able to install it. Make sure to tighten the screws around the hinge well and loosen as needed for proper rotation. Also, make sure to use screws that do not stick out for the panda touch mount.
I did tweak it on Tinkercad which is much more limiting than some other 3D CADs, at least from the very little experience I have, so if you want to, please make a remix fixing my mistakes.
I hope you will enjoy it!
shout out to @elsebski @Pretzel3D
Design by 2B2C1D on MakerWorld (license: BY).