Prusa Mini Carriage for Bambu A1 Mini Bed

This print allows you to use a Bambu Lab A1 Mini bed on a Prusa Mini. This is primarily for people modding or diy-ing their own Prusa Mini variants, the A1 Mini bed runs on 24 volts just like the Prusa bed but is cheaper and more easily available in some regions. The only downside is that the A1 Mini bed isn't rated for the same temperatures as the Prusa Mini bed (it might be possible to run it at higher temperatures, but this hasn't been tested conclusively.)

Here's the parts you'll need:
1x A1 Mini Bed
4x Printed Spacers or other 4mm x 10mm long spacers
1x Printed Y Carriage/adapter
4x M4 x 25mm flathead screws
1x A1 Mini compatible build plate

Everything bolts together in a pretty straightforward fashion. The holes are sized for so that you can drive the screws/bolts in by hand and they will tap into the plastic, but you can use a M4 tap if you wan to save your wrists and hands some effort.
The only thing to keep in mind is that you will want to attach the LM8UU carriers to the carriage before bolting the bed to the carriage, as the nuts for those will be hard to reach once the bed is attached.

Design by leclairaaron on MakerWorld (license: BY).