PTFE fitting PC4-M10/M6 IKEA Skadis holder (guide)

This fitting holder offers several distinct features:

• Versatility: It can accommodate one or two fittings simultaneously from the top and bottom, depending on your needs.
• Drybox support: By using two PC4-M10 (or PC4-M6) fittings per hole, you can create an air-sealed environment for feeding filament from a drybox to your printer or AMS system.
• Filament guide: Install one fitting with a small piece of PTFE tube to guide the filament, reducing bending curves and minimizing friction.
• Variability and compactness: The design includes three models for 1, 2, and 4 holes, all compact enough to fit seamlessly on a Skadis pegboard.
• Reliable connection: The clearance between the hook and the holder body has been reduced to 5mm for a snug fit on the Skadis board. Additionally, the number of walls has been increased to ensure the hook is solid and rigid.
• No waste: The model requires no brim or support during printing.
• Precision thread: A layer height of 0.12mm ensures precise printing of the thread for smooth functionality.

There are 5 print profiles available.

• 1 - First version for PC4M10 fitting for max space saving. Designed for the original white IKEA SKADIS board!
• 2- Second version for PC4M10 on 5mm wider (distance from SKADIS board)  and more convenient to operate. Designed for the original white IKEA SKADIS board!
• 3- Same wider version but for PC4M6 fitting. Designed for the original white IKEA SKADIS board!

Then I realized that some SKADIS boards, especially custom-made, are thinner and my holder are not tightly sit on them. So I have published 2 more print profiles to close the gap. Please use these ones if the original holders do not fit tightly:

• 4 - PC4M10 wider version for a custom thin SKADIS board
• 5 - PC4M6 wider version  for a custom thin SKADIS board

I recommend you also print this Skadis lock plug, size #6, which will perfectly fix the holder on the board.

I am using the 4-hole version with Skadis spool holders for the AMS system.
You can also see the fitting plug in the photo; the model is available here.

Happy printing!

Design by TinkerVault on MakerWorld (license: BY-SA).