Remix HSW Hinged Allen Wrench Screwdriver Mount

Was looking for a solution to store my allen wrench screwdrivers but none of the other models fit my needs.  I came across this  model created by Cliffythemaker.  I had to remake the arm and modify the hinge since the new arm was wider.  I added labeling to both sides. There are 2 versions available.  One is colored and the other is just plain with embossed numbers.   I printed all of my test models in ABS but they should print fine in other materials as well.   If you don't already have the allen wrenches and you want to buy the 4 piece allen set you can find them on AliExpress here or on Amazon here.  You will need a small set of needle nose pliers to remove the supports, but they are not too difficult to remove. 

Edit: 4/7/24 Due to feedback given by user.   Profile overwritten so previous feedback still remains from old design. 

• Added radius to inside edge of top hinge and extended outside chamfer up to the top to give the hinge a little more strength. 
• Put a small radius on all inside edges of hinge to allow better movement. 
•  Increased the wall loops and infill on the hinge for more strength. 
• Changed supports from tree to normal to allow easier removal.  
• Bambu logo removed from arm and replaced with allen sizes on both sides of the print.  Also increased font size for easier visual reference. 

New version on the left vs old version on the right. 

Design by M/T Designs on MakerWorld (license: BY-SA).