Roboco-San Hololive V-tuber figure
Roboco-San Hololive V-tuber figure
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
A model of Hololive's best Gen 0 V-Tuber, Roboco-san!
Roboco-san is one of Hololive Japan's first ever V-Tubers, and is a robot girl. This pose seeks to capture her simple elegance while allowing for an easy enough print.
Credit: This figure has been made from her .mmd model which is available online, as well as poses from @Darkivralii666 on deviant art. I modified the pose and the model for printing, especially doing my best to reduce the burden of her hair and reducing vestigial geometry. I used FormWare's
Pre-Print Info: I printed mine on my stock P1P using Bambu PLA Matte. As always, make sure it is well calibrated. I used the highest quality available with my 0.4mm nozzle (0.08mm layers), slim tree supports, and a very slow print speed. I would recommend printing at 300-500% scale. I printed at 400% scale with 15% gyroid infill and tree supports for a total material cost of 79g. My print took ~12 hours, though you could probably do it quite a bit more quickly with a similar result.
Post-Print Info: You will likely need to spend some time removing the supports from her hair. Be careful not to break off her hair or her fingers and you should be good to go. With a respirator/mouth and nose protection, I would recommend sanding and priming her before printing.
Design by Fish_Owl on MakerWorld (license: CC0).