Simple Magnet Slider Fidget

I designed this because I wanted a low filament usage fidget that would still be cool. Print at 100% if you are using 4x2 magnets, and print at 150% if you are using 6x3 magnets. I have only printed it with 4x2 but in theory you can also use 6x3. It will need superglue, but I recommend using superglue for both versions anyway. Download the print profile, then duplicate if you want more for optimized settings. I would strongly recommend this, as my settings are better.

Design by Cooper's Creations on MakerWorld (license: BY-SA).