Simple PTFE tube drybox connector PNP

Simple PTFE tube connector in PLA.

IMPORTANT

If you print in PETG, you might want to edit the scale either one of the connector to be a little bit smaller or larger as the thread is optimized for PLA which I only have at the time. 

PETG print profile in V2!

https://makerworld.com/en/models/1432518-drybox-ptfe-tube-connector-v2#profileId-1489849

Stuff you need :

10mm hole on the dry box,

8mm-9.5mm gasket (optional).

How to :

1)Place the threaded (male) part inside the dry box and lock it with another part (female) on the outside.

2)Push in your 4mm PTFE tube. Done!

Design by vomobimo on MakerWorld (license: CC0).