Spool Holder for Bare and Honeycomb Storage Wall
Spool Holder for Bare and Honeycomb Storage Wall
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Wanted to get cool Wall mounted Spool Holder for my new Bambu A1 Mini printer and didn't find anything really like one I want, so my solution was to make my own. And actually it went to pretty cool project in my opinion so I decided to share it :) .
So here is a Spool Holder you can mount to Bare wall and as an extra bonus to HSW (Honeycomb Storage Wall). I will make in addition one for MultiBoard as well, but first I will need to print some MultiBoard panels for prototyping as I haven't printed them yet.
Holder is a multipart model so You will have to assemble it (I don't think it is any hard to understand how) and You will have options. I Mean, You can Mount it to Bare or HSW wall and if You don't want to use a PTFE guiding from Holder to printer, You Don't have to print a Guide part, but if you do then there You will have 2 options.
This is Rough visual of assembly:
List of Parts to use on Bare Wall
|
Main Wall Bracket
Bracket have 6 Screw Holes optimised for 3.5mm standard screws with countersunk head. You can use a 3mm Screws with smaller heads if in Your case 3.5mm screws have to big heads as they must completely sunk into chamfered slots. 4 screws should be enough, but extra 2 are for stronger hold. When You install Main Wall Bracket make sure that Opened sides of slides are faced UP |
 |
|
Left and Right Sides of the Holder
Holders Slides in Main Bracket rail slides from Top. Important moment here. If you are going to use a Guide Bracket, then You have to install it between Left and Right Holder side before you slide them into Main Brackets slide rails.
|
  |
|
Filament Guide Bracket
This is optional. Print and use it if You like the idea like me. Guide for Filament and PTFE tube. 2 different Types To be used with Threaded PTFE coupler holder Funnel or one with simple Locking Ring. So choose the one You like more. One thing to know. This is a part of model You will have to use a Supports when printing. |
For Holder with Locker Ring: For Holder With Thread: 
|
|
PTFE Coupler Holder Funnel
So we have a two styles. Ringed one and Threaded one. Screw in Your decided Holder Funnel a PC4M10 PTFE coupler and install it to Filament Guide Bracket. |
Ringed one: Threaded one: |
|
Top Cap for Main Bracket
Not necessary to use, but gives better aesthetical look and better Side Holder wall hold in the Main Bracket. Put them on until they snaps in. |
  |
List of Parts to use on Honeycomb Storage Wall (HSW)
Two different Styles
|
Main Honeycomb Storage Wall Bracket with Hexed Inserts
Main wall bracket to be used with standard Honeycomb Storage wall Hex hole inserts. |
 |
|
Main Honeycomb Storage Wall Bracket with M4 screw holes
Main wall bracket to be used with standard Honeycomb Storage wall M4 screw hole inserts. |
 |
List of Hardware needed
|
PTFE Tube Coupler
P4M10. One piece. |
 |
|
3.5 or 3.0 Countersunk Screw
For fitting to Bare Wall From 2 to 6 pieces. More gives stronger hold. |
 |
|
M4 Machine Countersunk Screw and M4 Nut
For fitting to Honeycomb Storage Wall (HSW) From 2 to 6 pieces. More gives stronger hold. |
 |
That's it. If You like it, Enjoy!
You can Buy me a coffee if You want to support me in my work here :)
https://www.buymeacoffee.com/warlogh
(And very Big Thank You For interest in my work)
Design by warlogh on MakerWorld (license: BY).