Steam Deck lightweight front cover - protects joysticks and screen (full front cover version)
Steam Deck lightweight front cover - protects joysticks and screen (full front cover version)
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
I needed a simple and lightweight front cover to protect the joysticks and the screen when traveling light, so I made one.
Two versions: Full front cover (this one), and partial front cover, without the front corners (link):
PARTIAL FRONT COVER WITHOUT THE TWO FRONT CORNERS CAN BE DOWNLOADED HERE
- Prints as a single piece in the P1P and X1C (and any larger printer)
- Very light, weights only 60g printed!
- Smooth corners to not snag into other stuff when thrown in a backpack
- Very thin, can flex slightly to fit snugly around the deck
If you prefer a looser fit, increase the width by 1mm. That is, the widest measurement (leave height and length the same). The standard model has a very tight fit and need some flex to install and remove.
I tested in PLA and PETG. PETG fits as well and is more flexible, but the finish is worse due to the supports.
Supports required. I can print with only a few supports depending on angle, but there aren't many choices given the size and complex shape. If you can print without supports on a larger printer, let me know!
Must be positioned diagonally on the bed to fit on the P1P and X1C:
Design by Giskard Reventlov on MakerWorld (license: BY-SA).