TPU 22mm + 19mm Caps for Chairs, Tent posts, Extending poles.

Here are two TPU caps for chairs, poles or PDR hood and trunk props. The original caps can wear out over time like in this picture:




Included is a 22mm and 19mm cap. Both have a slight texture on the ends to prevent slip. Slide on easily.

Prints easily too with Bambus 95A TPU. No supports or brim required. Printed on the texture plate NOT using the AMS as TPU is not compatible.

Design by 3DPrintCraft on MakerWorld (license: BY-ND).