Unbound Angel

⚠️ IMPORTANT PRINTING NOTES – READ BEFORE PRINTING

• 🔧 Supports Required – This model absolutely requires supports due to the extended wings and complex geometry.

   

• 📏 Layer Height Matters – You must print at 0.08mm or finer. Printing at 0.2mm will result in wing detail being cut off or missed entirely.
  • ✅ Side-by-side comparison image included (0.08mm vs. 0.2mm)
  •  
• 🕊 Fragile Wings – The wing structures are delicate and may snap if handled roughly post-print. Take extra care when removing supports and during transport.

Design by Te iubesc on MakerWorld (license: BY).