Vewlix Coin Mech - Coin Box Version
Vewlix Coin Mech - Coin Box Version
- Made to order — 3D printed after you buy
- Free shipping on orders over $25
- Quality checked before it ships
- Questions? Contact us · Returns
Attribution
The following text must be included in any distribution of derivatives of this board. All links must also be included.
Based on the Vewlix Coin Mech by TheTrain
Copyright © 2024 TheTrain
Changes from the original design:
- list any changes you make here
Summary
Summary
This is a replacement coin mech for use in Vewlix and Chewlix units. I designed this because I wanted a more simple coin mech that would take whatever type of token or coin I put in the unit.
There are two versions of the model, this is the first version.
This version will route the coin to the coin box.
A full set of printing STLs as well as source STEP files are provided with this.
To assemble the Vewlix Coin Mech - Coin Box Version you will need:
- 1x Long wire microswitch
- 4-6x M3 14-16mm countersunk hex bolts
- 2x M4 25mm button-top hex bolt
- 2x M4 flange nut
- 2x M3 18mm countersunk hex bolt (or a 25mm bolt will do)
- OPTIONAL 1x M4 18mm button-top hex bolt (or a 25mm bolt will do)
- OPTIONAL 1x M4 flange nut
Printing tips
Print multiple outside walls as well as multiple top and bottom layers so that this prints at 100% infill. It is a very small part but prints quickly and will be strong.
I printed this originally on my Bambu X1C with matte black PLA.
Donations
Donations are not necessary but always welcome! All received donations will be used for further prototyping.
https://www.paypal.com/donate/?hosted_button_id=2JMTZVCGLDYC2
Revision History
v1.0
- Initial open source design
Acknowledgments
- TheTrain for doing the original design
Design by TheTrain on MakerWorld (license: BY-SA).