Waste Management Logo Hueforge

I created the Waste Management logo as a Hueforge to put on the side of a dumpster I printed.

https://makerworld.com/en/models/418249-dumpster#profileId-320818

The design can be scaled up. Scale the design to whatever dimensions you want, turn of Uniform scaling and set the Z height to 2mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x125mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:

PLA White 

PLA Yellow 

PLA Forest Green

Swap Instructions:

Start with White

At layer #12 (1.04mm) swap to Yellow

At layer #20 (1.68mm) swap to Forest Green for the rest.

Design by Thomasrox3 on MakerWorld (license: BY).