Wire loom tool - Kabelfresser Werkzeug

This wire loom tool makes inserting the wires in the corrugated tube much easier.

The design was made using Sketchup. You can also download and change the skp file to meet your needs. The design in the skp file is 100mm diameter, so it needs to be scaled down. I used netfabb basic to do this, but most slicers offer some sort of scaling as well.

Print Settings

Printer:

Ultimaker 2+

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

40%

Notes:

I used 0.2 resolution, which works fine. Infill set to 40% and I used "tree support" in Cura 3.4

I printed it with the pointy tip facing up, that way very little support is required.

Category: Hobby

Design by R4C3R-911 on MakerWorld (license: BY).